Motorcycles must not be ridden for a long time.
1, clean the car, dry or dry, expose the moving parts (such as chain), adjust the bolts, bearings and so on, and then apply oil or grease to prevent rust.
2, the gasoline will be released from the tank and sealed by the container. At the same time, the gasoline in the carburetor should be exhausted to prevent the impurities in the gasoline from blocking the carburetor hole and oil channel.
3, remove the battery and clean it. Before the vehicle stops, make up the electrical discharge in the dry place, and replenish the electricity once a month. But do not release the electrolyte in the battery to prevent the plate from being exposed to air and cause oxidation of the plate.